Dead Pixel Test: Check Your Screen for Dead and Stuck Pixels

All free tools›Check

Press Start the full screen test. The screen turns one colour. Look closely at every part of it, then click or press Space for the next colour. A pixel with a fault shows as a dot that does not match. Press Esc to finish.

How to test your screen

  1. Wipe the screen with a dry microfibre cloth. Dust and small marks look like faulty pixels.
  2. Start the test and go through all eleven screens. Lean in and scan from corner to corner on each one.
  3. If you see a dot, move your head. A mark on the surface shifts against the picture; a faulty pixel stays exactly in place.
  4. Note the colours on which the dot appears. That tells you what kind of fault it is.

Dead, stuck or hot: what you are looking at

  • Dead pixel: always black. It shows on white and on every bright colour and disappears on black. The pixel gets no power and cannot be repaired.
  • Stuck pixel: always red, green, blue or a mix of them. It shows best on black and on the colours it is not. One part of the pixel is stuck on, and it sometimes recovers.
  • Hot pixel: always white. It shows on black and on dark colours.
  • Dark patch or bright edge: a larger uneven area is not a pixel fault. Uneven backlight shows best on the black screen in a dark room.

What each screen is for

  • Black: stuck and hot pixels, and light leaking in from the edges.
  • White: dead pixels and dirt, and uneven tint.
  • Red, green and blue: each one tests one of the three parts of every pixel.
  • Cyan, magenta and yellow: two parts at once; a dot here confirms which part fails.
  • Gray: uneven brightness and faint lines.
  • Gradient: should be smooth from black to white. Visible steps mean limited colour depth or a compressed signal.
  • Grid: thin lines should be sharp and evenly spaced. Blurry or coloured lines point to a wrong resolution or scaling setting.

Can a stuck pixel be fixed?

Sometimes. In the test, turn on Flashing square and click on the stuck pixel so that the square covers it. Leave it for 10 to 20 minutes. The fast colour changes can free a part that is stuck on. It does not help a dead (black) pixel.

Do not press hard on the screen. Pressure can damage more pixels. If the screen is new, check the pixel policy of the maker or the shop instead: many replace a screen with a bright pixel, or with several dark ones.

Before you buy, sell or return a screen

Run the test on the first day, while the return period is open. Take a photo of any faulty pixel on the colour where it shows best, and note the resolution shown under the test.

Frequently asked questions

Is the dead pixel test free?

Yes. It is free, with no sign-up and nothing to install. It runs in your browser.

Does it work on a phone, a tablet or a TV?

Yes. Open this page in the browser of the device and start the test. On a TV, use the browser of the TV or connect a computer to it.

What is the difference between a dead pixel and a stuck pixel?

A dead pixel is always black and cannot be repaired. A stuck pixel is always one colour and sometimes recovers.

How many dead pixels are acceptable?

It depends on the maker. Many follow a standard that allows a small number of faults per million pixels, and some replace a screen for a single bright pixel. Check the warranty terms of your screen.

Is the flashing square safe?

It flashes very quickly in a small area. Do not use it if flashing light can cause seizures or migraines for you, and do not stare at it.

Why does the page leave full screen?

Pressing Esc, switching windows or a system message ends full screen. Start the test again; you can begin with any colour from the list.

Try next

Take a short break

All 45 browser games →

Related tools